Find Out Current Disk Size

Type the following command:
# fdisk -l /dev/sdb
Sample outputs:

Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes
255 heads, 63 sectors/track, 364801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdb doesn't contain a valid partition table

Linux Create 3TB partition size

To create a partition start GNU parted as follows:
# parted /dev/sdb
Output:

GNU Parted 2.3
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted)

Creates a new GPT disklabel i.e. partition table:

(parted) mklabel gpt

Sample outputs:

Warning: The existing disk label on /dev/sdb will be destroyed and all data on this disk will be lost. Do you want to continue?
Yes/No? yes
(parted)

Next, set the default unit to TB, enter:

(parted) unit TB

To create a 3TB partition size, enter:

(parted) mkpart primary 0 0

OR

(parted) mkpart primary 0.00TB 3.00TB

To print the current partitions, enter:

(parted) print

Sample outputs:

Model: ATA ST33000651AS (scsi)
Disk /dev/sdb: 3.00TB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number  Start   End     Size    File system  Name     Flags
 1      0.00TB  3.00TB  3.00TB  ext4         primary

Quit and save the changes, enter:

(parted) quit

Sample outputs:

Information: You may need to update /etc/fstab.

Use the mkfs.ext3 or mkfs.ext4 command to format the file system, enter:
# mkfs.ext3 /dev/sdb1
OR
# mkfs.ext4 /dev/sdb1
Sample outputs:

mkfs.ext4 /dev/sdb1
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
183148544 inodes, 732566272 blocks
36628313 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
22357 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
	4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
	102400000, 214990848, 512000000, 550731776, 644972544
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 31 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.

Type the following commands to mount /dev/sdb1, enter:
# mkdir /data
# mount /dev/sdb1 /data
# df -H

Sample outputs:

Filesystem             Size   Used  Avail Use% Mounted on
/dev/sdc1               16G   819M    14G   6% /
tmpfs                  1.6G      0   1.6G   0% /lib/init/rw
udev                   1.6G   123k   1.6G   1% /dev
tmpfs                  1.6G      0   1.6G   0% /dev/shm
/dev/sdb1              3.0T   211M   2.9T   1% /data
Was this answer helpful? 4 Users Found This Useful (20 Votes)